Description
The Zubat Pole Saw is a lightweight, state of the art, telescopic pole saw.
HOW TO USE
To extend the Zubat Pole Saw, the clamps must be released and poles extended from the bottom up and closed from the top down.
It is important that both locking systems are used to ensure the structural rigidity of the extended poles. Spring loaded locking buttons allow multiple length adjustment and safety friction clamps hold the extensions firmly in place.
As with all Silky Saws, the cut is on the pull stroke which means the blade will be under tension and will not bow.
Let the blade do the work for you.
Never force the blade on the push stroke as you will be pushing against the direction of the teeth – if the blade becomes caught, do not push hard against it. Carefully take the pressure off the blade in order to release the saw.
The Zubat Pole Saw should always be stored in the closed position with the blade guard in place. They should also be cleaned of any debris/dirt to ensure a smooth opening operation. The blade should ideally be cleaned with a solvent – this will help to prolong the life of the blade.
WARNING. DO NOT USE POLE SAWS WITHIN 15M OF POWER LINES OR ELECTRICAL WIRES. Failure to heed this warning may result in serious injury or death by electrocution.
WARNING. NEVER CUT DIRECTLY ABOVE YOUR HEAD. Always consider where falling branches will land on the ground. We strongly recommend the use of protective hard hats and glasses when using pole saws.
WARNING. Silky Saws are extremely sharp so please be careful when using and keep away from children. Improper use can cause serious injury.
MANUFACTURER WARNING. Incorrect use of a Silky Saw may cause injury. Silky, its affiliates, subsidiaries, importers, distributors and dealers are not responsible for and shall not be liable for any fatality, injury, loss, or damage resulting from the use of its saws.